SACC-DSIV-MS-4CON-L90 SCO

https://www.phoenixcontact.com/us/products/1436589 Flush-type connector - SACC-DSIV-MS-4CON-L90 SCO - 1436589 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type connector, connector, 4-pos., M12 SPEEDCON, A-coded, rear/screw mounting with M12 thread, with polarity protection, with angled solder connection Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc Weight per Piece (excluding packing) 0.012 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Rated current at 40°C 4A Rated voltage 250 V Number of positions 4 Insulation resistance ≥ 100 MΩ Coding A - standard Status display No Overvoltage category II Degree of pollution 3 Connection method Solder pins Mounting type Rear mounting M12 x 1 With flat nut 04/29/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/1436589 Flush-type connector - SACC-DSIV-MS-4CON-L90 SCO - 1436589 Technical data Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Standards and Regulations Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals 04/29/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/1436589 Flush-type connector - SACC-DSIV-MS-4CON-L90 SCO - 1436589 Approvals Approvals UL Recognized / EAC / EAC Ex Approvals Approvals submitted Approval details UL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 250 V EAC  EAC  Drawings Schematic diagram 2 ,0 5 1 15 3,54 +0 3 Ø 2 5,8 9,8 9,8 12,34 2, 8 +0 Pin assignment M12 plug, 4-pos., A-coded, view plug side ,0 5 ø2 ,0 5 4 Drilling diagram 4xØ1,3 ±0,05 Drilling diagram 04/29/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/1436589 Flush-type connector - SACC-DSIV-MS-4CON-L90 SCO - 1436589 Dimensional drawing Dimensional drawing 30,1 Ø16,4 19,6 8,5 19,6 15 14 15,8 M12 flush-type connector, connector, side view M12 flush-type connector, connector, front view Dimensional drawing Dimensional drawing 15,9 15,9 8,5 29,6 19,2 Ø1 M12 flush-type connector, plug, contact carrier, side view Dimensional drawing M12 flush-type connector, plug, contact carrier, front view Dimensional drawing 20 10 Ø1 2 ≤1,5 9,2 12,5 Ø7 Optionally with O-ring (green) for tight seal when plugged in. - the axial mating force of 80 N per connector may not be exceeded when using with assembled O-ring! - Avoid radial forces! Locked area on the PCB 04/29/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/1436589 Flush-type connector - SACC-DSIV-MS-4CON-L90 SCO - 1436589 10 ±0 ,0 5 Dimensional drawing ±0 ,9 45 ,0 1 ≤1,5 Ø12,2±0,05 5 5, 45° 2 Panel cutout, view from front in case of horizontal PCB (2). The 3rd flat area is optional (1). Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/29/2016   Page 5 / 5